Analysis of resistance factors for LRFD of soil nail pullout limit state using default FHWA load and resistance models     

Hui Hu 《Marine Georesources & Geotechnology》2020,38(3):332-348

Abstract

Resistance factors for load and resistance factor design (LRFD) of pullout limit state of both permanent and temporary soil nails are calibrated against a wide design space using the current Federal Highway Administration (FHWA) nail load and resistance models. The calculated resistance factors were shown to scatter broadly among design scenarios that differ in wall face batter, soil friction angle, nail ultimate bond strength, and surcharge live load. An important lesson learned from the analysis results is that the current practice of using a single resistance factor for LRFD of nail pullout limit state could not result in uniform reliabilities across different design scenarios. Simple artificial neural network (ANN) models were developed for computation of resistance factors. Design examples demonstrated the ability of the ANN models in providing resistance factors that yield satisfactory and consistent reliabilities in different nail pullout designs.  相似文献   

复杂载荷作用下立管触地段损伤管道的动力响应     

代云云  周晶  李志刚 《中国海洋大学学报(自然科学版)》2020,(1):145-153

触地段(Touchdown zone, TDZ)是在役钢悬链线立管(Steel catenary riser, SCR)的关键部位,在复杂载荷作用下,极易形成损伤缺陷,其载荷寿命的评估是深海结构工程中的一个关键问题。本文以大型有限元软件ABAQUS为平台,运用损伤管道实体单元与土弹簧阻尼单元相互作用的模型模拟触地段损伤海底管道在复杂载荷作用下的动力响应,数值计算考虑了管-土相互作用过程中的材料非线性、几何非线性以及接触非线性。讨论了单一环向体积损伤位于触地段管道的不同位置时,触地段损伤管道在不同载荷作用下的动力特性及特征点的动力响应。结果表明,管道所受内外压力以及管道提升端的竖向位移载荷会影响结构的自振频率;体积损伤部位的动力响应较完好部位更剧烈;体积损伤的位置和动力载荷频率对管道动力放大系数的影响很大;当动力载荷的激励频率越接近结构基频时,损伤管道的动力响应及动力放大系数越大。  相似文献   

Chemical Procedures for Rhenium Extraction from Geological Samples: Optimising the Anion Resin Bead Clean‐up Step     

Gang Yang  Aaron Zimmerman  Nicole C. Hurtig  Svetoslav V. Georgiev  Vineet Goswami  Judith L. Hannah  Holly J. Stein 《Geostandards and Geoanalytical Research》2020,44(2):231-242

Rhenium–osmium geochronometry for samples with low Re and complex matrices requires improved Re extraction methods. Here, we investigate plausible controls on efficiency and efficacy of Re extraction during our anion resin bead purification. Four different protocols are compared, each isolating a single variable to test. Rhenium concentrations for solutions at each step of each protocol document differences in chemical recovery/yield. The negative‐thermal ionisation mass spectrometry (N‐TIMS) signal intensity serves as a proxy for Re yield and purity. These data document correlations between the N‐TIMS signal intensity and (a) the duration of anion resin bead conditioning prior to loading with Re‐bearing solution, and (b) both duration and strength of nitric acid used during rinsing of the Re‐loaded anion resin bead. The optimal protocol improved Re signal intensity around fourteen times compared with our current Re extraction protocol, an aggregate of 2.4 times improvement in chemical recovery (yield) and 5.8 times improvement in emission efficiency (purity). Repeated N‐TIMS isotopic measurements on our in‐house Re standard solution (1407) verify that our optimal protocol‐3 does not fractionate Re isotopes. The improved anion resin bead method considerably lowers the Re detection limit and allows Re‐Os isotopic analysis of picogram‐level Re hosted in geological samples with complex matrices.  相似文献   

联合BDS/GPS的北斗广域差分实时电离层延迟格网改正方法研究     

房成贺  陈俊平  兰孝奇  张磊 《大地测量与地球动力学》2019,39(2):169-177

研究并实现中国区域北斗广域差分实时电离层延迟格网改正算法，针对北斗单系统实时建立电离层延迟格网的不足，提出联合BDS/GPS的北斗广域差分实时电离层延迟改正方法。比较BDS、GPS以及BDS/GPS观测的实时电离层延迟格网，并利用北斗单频单点伪距定位进行精度验证。结果表明，在有效格网点覆盖充足的地区，BDS与GPS实时电离层延迟格网定位效果相当；而联合BDS/GPS观测的实时电离层延迟格网极大提高了偏远地区的单频定位精度与可定位历元数，也使原本单系统格网覆盖充足的地区定位效果得到进一步增强和稳定。  相似文献   

Discussion of user-defined parameters for recursive subspace identification: Application to seismic response of building structures     

Shieh-Kung Huang  Jun-Da Chen  Kenneth J. Loh  Chin-Hsiung Loh 《地震工程与结构动力学》2020,49(15):1738-1757

Structural damage assessment under external loading, such as earthquake excitation, is an important issue in structural safety evaluation. In this regard, an appropriate data analysis and system identification technique is required to interpret the measured data and to identify the state of the structure. Generally, the recursive system identification algorithm is used. In this study, the recursive subspace identification (RSI) algorithm based on the matrix inversion lemma algorithm with oblique projection technique (RSI-Inversion-Oblique) is applied to investigate the time-varying dynamic characteristics. The user-defined parameters used in the RSI-Inversion-Oblique technique are carefully discussed, which include the size of the data Hankel matrix (i), model order to extract the physical modes, and forgetting factor (FF) to detect the time-varying system modal frequencies. Response data from the Northridge earthquake from the Sherman Oaks building (CSMIP) is used as an example to examine a systematic method to determine the suitable user-defined parameters in RSI. It is concluded that the number of rows in the data Hankel matrix significantly influences the identification of the time-varying fundamental modal frequency of the structure. An algorithmic model order selection method using the eigenvalue distribution of RSI-Inversion can detect the system modal frequencies at each appending data window without causing any abnormality.  相似文献   

基于车桥耦合振动的常用简支空心板梁桥冲击系数分析          下载免费PDF全文

梁栋  张硕  刘菁  邹轩 《世界地震工程》2019,35(3):144-152

通过Universal Mechanism和ANSYS软件相结合建立了车桥耦合振动模型，考虑车型、行车速度、车重和桥梁频率等因素，对工程常用的4种标准跨径装配式混凝土空心板梁桥进行了车桥耦合振动模拟。研究表明:冲击系数随车速增加而上升；随车重增加而增大；随桥梁频率的增加而降低。在多种因素中，车速对冲击系数影响最为明显。  相似文献   

车辆碾压作用下戈壁地表起尘浓度   总被引：1，自引：1，他引：0  

孟小楠  严平  王振亭  董苗  王勇 《中国沙漠》2019,39(1):80-87

通过野外观测车辆碾压作用下戈壁地表PM₁₀释放浓度，探讨其主要影响因素。针对戈壁区砾石、砂砾、砂质和砂土4种路面类型，应用TSI粉尘仪多次重复观测车辆碾压产生的PM₁₀浓度，进而阐明碾压次数、车速和地表水分等因素对起尘浓度的影响。结果表明：4种路面的平均起尘浓度依次为5.339、9.089、16.944、50.251 mg·m^-3，是自然状态下的5~50倍；起尘浓度随碾压次数增多而增大，其中砂土路情况下的增长最显著；随土层厚度的增大呈现出幂函数的增长趋势；降雨后路面起尘浓度显著减小，且降雨量会影响降雨后起尘浓度的变化趋势。最后提出了针对性的建议和措施以减弱车辆碾压导致的戈壁地表起尘。  相似文献   

集聚空间组织型式对中国地市尺度工业SO2排放的影响     

胡志强  苗长虹  袁丰 《地理学报》2019,74(10):2045-2061

集聚外部性是集聚影响工业污染排放的重要机制,不同的集聚空间组织型式具有不同的污染排放行为和减排效果。以中国285个地市工业SO₂排放为例,依据集聚经济理论,将集聚空间组织型式细分为集聚密度、企业地理临近度、专业化、多样性、相关多样性、非相关多样性等不同类型,在系统分析工业SO₂排放与集聚空间格局的基础上,通过构建计量经济模型,考察了不同集聚空间组织型式对工业SO₂排放强度的影响。结果表明：① 工业SO₂排放强度与工业集聚密度在空间上具有非对称性,污染排放强度西高东低,工业集聚密度、企业地理临近、多样性、相关和非相关多样性为东中高西部低;② 工业集聚对工业SO₂排放强度的影响存在空间溢出效应,相邻地区集聚密度、多样性和相关多样性水平的上升有利于本区域工业污染排放强度的下降,但专业化水平的上升则会提升本区域的工业污染排放强度;③ 提高集聚密度、引导企业集中布局有利于工业SO₂排放强度下降,多样且关联的产业组织结构有利于污染减排,而专业化和非关联产业的集中会提高污染排放强度;④ 集聚型式对工业SO₂排放强度的影响存在区域和城市规模上的异质性,集聚密度、企业地理临近、多样性和相关多样性对中西部污染减排的作用比东部明显,专业化和非相关多样性不利于东中部地区的污染减排;城区人口规模20万以下的小城市提高集聚密度、减少多样性特别是非相关多样性更有利于污染减排;城区人口规模20~50万的小城市和50~100万的中等城市,提高企业的地理接近度和多样性水平特别是相关多样性水平,有利于其降低污染排放强度;城区人口规模在100万以上的大城市,提高集聚密度和产业多样性水平在一定程度上有利于其污染减排,但其减排效果因拥挤效应而明显下降;⑤ 进一步降低工业SO₂排放强度,需要走集聚化道路,坚持提高集聚密度,因地制宜引导企业集中布局,着力提高产业在关联基础上的多样性水平,加强区域间联防联控,重视区域间的产业联系与环保合作。  相似文献   

Methane Oxidation in the Water Column of Xiangxi Bay,Three Gorges Reservoir     

Dan Lei  Jia Liu  Junwei Zhang  Andreas Lorke  Shangbin Xiao  Yuchun Wang  Wei Wang  Ye Li 《洁净——土壤、空气、水》2019,47(9)

Four field campaigns are carried out to quantify the methane (CH₄) oxidation rate in Xiangxi Bay (XXB) of the Three Gorges Reservoir (TGR), China. The water depth of the sampling site varied from 13 to 30 m resulting from the water level fluctuation of the TGR. The CH₄ oxidation rates are measured in situ as the decline of dissolved CH₄ concentration versus time in incubated, and those rates. The CH₄ oxidation rates range from 1.18 × 10^?3 to 3.69 × 10^?3 µmol L^?1 h^?1, with higher values and stronger variation during summer. A static floating chamber method is used to measure CH₄ emitted to the atmosphere resulting in an annual mean flux of 4.79 µmol m^?2 h^?1. The CH₄ emission rate is significantly negatively correlated with the water level. The results show that a large fraction of CH₄ is consumed in the water column with a range of 28.97–55.90 µmol m^?2 h^?1, accounting for ≈69–98% of the total CH₄ input into the water column, and more than 90% is consumed outside the summer, when the water level is lowest. Water depth, which is dominated by water level of the TGR, is a potentially important driver for CH₄ oxidation and atmospheric emission in the tributary bay.  相似文献   

青州市表层土壤元素地球化学组合特征研究   总被引：1，自引：0，他引：1       下载免费PDF全文

姜冰  刘阳  颜丙鹏 《山东国土资源》2018,34(9)

聚类分析和因子分析可以获得土壤元素地球化学组合特征及其差异性。对青州市表层土壤样品数据进行分析研究,通过聚类分析,绘制表层土壤元素聚类谱系图,将23种元素或指标分为5个元素组合簇群及2个单元素簇,研究各元素间的组合特征,探讨其相关性、聚集性及其指示意义;通过因子分析,找出有代表性的因子,用其代表变量,绘制典型因子得分等值线图,并从中分析不同元素组合的区域分布基于何种因素,用11个代表性因子的分布特征就基本可以代表青州市表层土壤23项原始变量的分布特征,并对F1,F2,F3主因子进行了地质解释。聚类分析与因子分析相结合,利于表层土壤中元素的共生组合特征及其差异性研究,利于对研究区表层土壤异常进行归纳总结。  相似文献